I will defer to HagssFIN since is a lot more knowledgeable and experienced then me.
One thing that I have read is the consumer grade PSU like this are no designed to run at full wattage on the 12V rail.  Usually they are less efficient and the 12V rail is only designed to take provide 60-70% of the power.  That supply would not be able to power an S9 by itself.

I think your best bet is to get 220V installed.  If 110V is absolutely the only option, then an APW5 may be about the best viable option - it will stably supply 1600W at 110V (or 2600W at 220V).  FWIW the APW5 is also very quiet - I use three of them to supply all my miners.