Hi, My first rig build is going to be: GPU: 6 x Galax GeForce GTX1070Ti EX Sniper White 8GB GDDR5
CPU:Intel Celeron G3900 Dual Core LGA 1151 2.8GHz Processor
Power Supply: Corsair HX1200M 1200W 80 Plus Platinum Modular Power Supply
SSD:Kingston SSDNow A400 120GB 2.5" SATA III SSD SA400S37/120G
Motherboard: ASUS PRIME H270-PLUS LGA 1151 ATX Motherboard
RAM: Crucial 4GB (1x 4GB) DDR4 2400MHz Memory
6 powered Risers and a open air frame.
Do i need to purchase any additional wires of anything to get my rig running or do i have all i need??
Should this be fine to just plug into a power outlet or do i need to check if it can handle it first? I live in Australia if that helps.
Yes, from the looks of it you're short of cables., your GPU requires 1x6pin and 1x8pin PCI-e cables, basically you need 8pins(6+2)Splitter to accommodate your 6x1070tis, what's in the PSU box are 2x (6+2)pins , 2x(6+2)pins with 6+2 splitter, 2x 8pins. and I am not including your risers here, however you can use the peripherals in 1 is to 1 concept that sata could handle the power ratings.
sorry you have confused me a bit, all i need is a splitter like this one
https://www.ebay.com.au/i/332421292719?chn=ps and the mobo power cable like the other guy stated and thats me all covered for wires? Also i found this wire diagram on reddit (
https://www.ebay.com.au/i/332421292719?chn=ps) does this look like the best way to wire it all up? I am not to sure what you mean when you say "am not including your risers here, however you can use the peripherals in 1 is to 1 concept that sata could handle the power ratings." Is the diagram just the easiest way to do it?