Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
astrosmurf
on 17/01/2018, 13:16:02 UTC
Quote from: astrosmurf on January 17, 2018, 11:20:11 AM
Quote from: Rcalin on January 17, 2018, 07:42:09 AM
Quote from: astrosmurf on January 17, 2018, 07:31:47 AM
Quote from: Rcalin on January 16, 2018, 08:20:51 PM
Quote from: kommando98 on January 16, 2018, 08:05:16 PM
I am having some issues messing with the OC settings on my smOS 8x1060 rig.  It seems when I try to change the clock or memory settings either with a single setting for all cards or individually, that it doesn't update as its not reflected in the Core/Mem column after I do it.  The only way I can modify the output of the cards is to increase the power to the cards.  Currently I'm running at 100W to each card just to get up to 2300sol/s for Equihash.  I'd like to be able to OC each card's settings accordingly on a lower power setting if possible, or leave the power setting as is and increase the output with the OC.
 ...

I saw someone say if the OC tab isn't working that you might need to delete then re-install rig.  This makes me a little nervous, do I just delete it from the dashboard and it will automatically pop back up in the dashboard again when I restart it?

Yes, that is exactly what will happen! If you have no other option, then go ahead and do it. I assure you, the rig will appear again on your dashboard, like it did first time, with noname attached to it.

I also assure you I had the OC thing happen to me too, like 1.5 months ago, and I fixed it like this, after I tried many other stuff, troubleshooting for like 4 hours.

I have the same issue, and tried to delete the rig as per Radu's advice, and it popped back up as a noname rig afterwards, but it didn't fix the OC issue. No matter what I do it seems the Core/Mem and temperature are stuck. Anyone have any other suggestions - please?

Are you OC'ing both core and mem in the same time? OC does not work unless you have some numbers in each column...

Thanks - yes, I've seen that mentioned several places and it has not been lost on me, both core and mem populated :-) Still no percieveable changes wether I OC or not, it seems like the OC settings somehow don't register at all...?

Ok, so now I tried to switch Rig Groups for the miner as well as try to edit the OC settings, and THAT didn't stick either. So no matter what I do the settings don't register with the mining rig.  I've already deleted the rig once and that didn't make any difference. Any suggestions please...?

edit: I should add that the correct group is reflected in the web interface, but the rig is clearly running the previous mining pool etc. when viewing the console.