okay I am building a rig for a guy using the b250 version 1 onda.
he wants windows. and I loaded windows 10 did the up date loaded nvidia drivers booted and I am at black screen.
pissed to say the least. any guess at what to do next.
I tried a few tricks but going nowhere fast here.
Hi Phil, I put windows on the Onda B250 you sent me this past Sunday. I played around a lot changing bios settings, got a black and then a grey screen. I was connected to an Nvidia card, not to the internal GPU. I was also connected to the network. I ended up hitting the clear CMOS button by the 2 USB ports. That at least got me to the screen where I could enter the bios settings again. This time I think I only changed PCIe speeds from max to Gen1. Rebooted, loaded windows from a USB stick, install went fine. I'll check over the weekend, but I am pretty sure I did not enable the 4G option, which you have to do on Asus Z270 boards. Can check all the other settings as well and I will report back.
But bottom line, same exact board and Windows is running fine. For memory I used the G.Skills stick that either you or someone else on here posted the link to NewEgg.