From my reading of Taek42's posts (sia dev)
Obelisk is unstable at 0.5V and stability is found at 0.6V delivering a 2.25 GH/w (833 GH total +/- 5%)
Yes, I'm agree with you but Taek42 said in a thread about the DragonMint B52:
spilltime 1 point il y a 5 heures
I recall you mentioning that there were certain voltages that would make the chip unstable. When chips deliver will this be tested on or has it been ruled out that our SC1 chips cannot run at 0.5v?
perma-lienembedenregistrerparentsignalerrépondre
[]
Taek42Developer 2 points il y a 2 heures
We will know in about 60 days if the chips run at 0.5V.
And another
surgingchaos 6 points il y a 12 heures
So... is my Obelisk going to turn into an expensive paperweight?
perma-lienembedenregistrersignalerrépondre
[]
Taek42Developer 3 points il y a 2 heures
No, the Obelisk unit should still be relevent. The specs are much better than the A3 specs, and if we are able to clock the chips down all the way, they are also competitive with the Dragonmint specs. We will know more in about 60 days.
Wait & see again
