Anyone have hash result for 1080ti?
and which exact brand, version card(s) you using, etc...
I have EVGA SC2 Gaming cards and they get about 24mh with ccminer 2.2.4 and 30mh with bitcore-spmod. They are running at 80% power which hovers around 200watts.
Many mining pool pages will have a benchmark page where you can see some of this info.
http://www.zpool.ca/bench?algo=bitcore&chip=549OK Thank for reply about what I expected
I have EVGA 1080ti Blacks arrive tomorrow
Q: You have set at 80%?
I stopped SPMod2 cos over several equal elapsed time I was not getting any more BTX in real compared to CCMiner 2.2.4/
and Kaspersky told there were infected..I talked to Kaspersky main and they insisted.
I am hearing most or all downloads out there carry file larger than original SPMod2
In afterburner I turn the power draw down to 80% or so for bitcore algo. It is not required but you will get better efficency hash per watt. You can add --plimit=200W into the miner .bat file but I just use afterburner. There is no doubt malware on some of the SPmod files floating around the internet. You could watch it with wireshark or something to see if it is legit. See who it is talking to.