Hi!
Is it possible to use the "-r Restart miner mode" Option even when are no Cards have issues?
I would like to have the miner stopped after a defined period of time (e.g. 12 hours) and to restart/switch to a other coin/walletwallet for 12 hours and then again Switch back.
So at the end i´m looking/asking for a coin/wallet switching possibility in a chosen timeframe.
thanks!
Don't know, but I used to place an Arduino and a relay on the on/pff switch.
I had some problems with the machine running stable and put a temperature sensor on the Arduino. When the temp was low (because the cards generate some heat) I let it press the on/off switch for 10 seconds. Stop 1 minuten. Put switch again on for 1 second. Wait 10 minutes (because a new start should warm up the cards) and then wait for the whole process.
You can put a timer on it.
May be something like this.
https://www.youtube.com/watch?v=saKqxqGffz4