To those who are afraid their temperature is too high. My third chain is running up to 96 degrees since 48 hours, no issue on the hashrate so far.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
Yea, and by next week you'll have a dead board. 96c for ASICs are WAY to high. Anything over 80-90c will seriously reduce the lifetime.
Also remember that bitmain has a temp diode on a SINGLE chip in that string. If that one chip is reporting 96c, you can definitely expect a variance of +/- 20c over all the chips. All it takes is one chip to overheat and blow the whole board/chain.