Thanks I'll give a try but after few hours of mining I also noticed that some of the match_work_counts are zero:
It looks like some of the chips are not working.
I rebooted the unit many times but the same match_work_counts are always zero.
The unit running stable but only with 50-57 Gh/s.
What can I do?
Code:
[match_work_count9] => 0
[match_work_count10] => 0
[match_work_count11] => 0
[match_work_count12] => 0
[match_work_count13] => 0
[match_work_count14] => 0
[match_work_count15] => 0
[match_work_count16] => 0
[match_work_count10] => 0
[match_work_count11] => 0
[match_work_count12] => 0
[match_work_count13] => 0
[match_work_count14] => 0
[match_work_count15] => 0
[match_work_count16] => 0
It looks like some of the chips are not working.
I rebooted the unit many times but the same match_work_counts are always zero.
The unit running stable but only with 50-57 Gh/s.
What can I do?
Open the cover (count the nuts you retrieve so you don't end up with one dropped on the inside shorting out
the FPGA board) and re-connect the power cord coming from the PDU to the second hashing module and also check it's flat cable going to the FPGA controler board.
One of them is probably loose from shipping abuse