Re: Gateless Gate Sharp 1.2.10: zawawa's open-source dual ETH/XMR/PASC/LBC/FTC miner

Gateless Gate Sharp 1.2.11 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.11-alpha

* Addressed compatibility issues with yiimp-based pools.
* Made stratum-related codes more robust.
* Adjusted default settings for RX 470/480/570/580.
* Switched from intensity to row intensity for NeoScrypt.
* Enhanced the automatic upgrade feature.

This should fix all the reported pool-related problems.
Please do let me know if they still persist.

that's awesome neoscrypt best use raw intensity

No luck man Sad

!!! I installed 1.2.11 alpha and not comes back after dev mode:

2018-01-29 05:07:26.8410 [15] Share #17 accepted.
2018-01-29 05:07:28.0624 [16] Device #2 submitted Share #18 to pool.bsod.pw as RQL48SX2P3m1ySmsyFFexNNKFiJiQ9e4e9.RXNITROMQ0.Maq0.
2018-01-29 05:07:28.4408 [15] Share #18 accepted.
2018-01-29 05:07:30.5536 [16] Device #2: 933,28 Kh/s (NeoScrypt)
2018-01-29 05:07:40.5611 [16] Device #2: 931,50 Kh/s (NeoScrypt)
...

The problem was quite simple. The pool was just too slow to send a new job, and GGS did not wait for long enough.
Let me see...

I tested 1.2.10, 1.2.9, and had similar problems after dev fee.

So, I'm using 1.2.7, that comes back to work after dev dee, but with all GPUs instable, with 200h/s and 800 h/s, jumping.

This occours in a RIG with 6 GPU and a Celeron processor with 4GB RAM.

But in AMD Ryzen 7 1700 with 4 GPUs comes back normal.

I tried to stop, release memory and start and problem continues.

I tried to relaunch and start, and problem continues. The jumps does total hashrate/s drops 10%+

The Act. column never stays 100%, stays 100 70 0 2 50 32 90...

Stopping, closing the GGS and starting again (double clicking in the .exe) the problem disappears.