What is the total wattage draw of the GPU's & MB and the rating of the PSU(s)? As a rule of thumb, you don't want to exceed 80% of the PSU capacity. Also may need to check circuit this on and make sure it isn't being pushed beyond 80% -ex, if on 15A ckt, then W= A x V, assuming 120V, then Watts=1800 and 80% of this= 1440W.
Great stuff here!
I forgot to mention i have a EVGA 750 G2 Gold
I pulling 632.5 @ this moment typing from the wall.
I have a EVGA 600B Bronze ready to add, but waiting for pcie extension cable's.
When i do get 6 gpu's, I will run four RX570 just on 750G2 and the other 2 RX570's and System on the 600B.
ALSO?
I use at the moment Sata to 6pin to power my risers, i have molex to 6pin in mail. It has two molex into 6pin, do i need to hook up both molex's to work?
Ok i just did the math, 80 % of 750 = 600
I'am pulling 615 to 630. I need to add this 600B ASAP!