I am having a strange issue.
I am unable to adjust the clockspeed on my miner if I set it to anything other than 800 it fails to hash anything and stops responding
here are my settings
bfgminer.exe --scrypt -o stratum+tcp://poolurl.com:4224 -u bla.user -p password --no-longpoll -S MLD:\\.\COM5 --set MLD:clock=800 --verbose
This seems to be the only setting that works, If I set it higher, or lower it fails to respond. 800 is not even in your list of preset clock speeds. I've adjusted the power, lowered it, raised it, not difference. It is hashing at about 3.4Mh/s with HW:251/.20% in the last 21hrs.
What do you mean it fails to respond? At 3.4mh your defaulting to stock speed of 600mhz. Sounds like your not editing the clock speed correctly?
I figured since it was not one of your specified clock speeds it was defaulting to something.
This is the error I get.
http://puu.sh/zcuiU/7fa3e36764.pngI've done some more testing, clock speed 700 seems to work fine at around 4Mh/s I occasionally get an error(JSON-RPC non method decode failed: (null) Unknown startum msg:{"id":null, "result":[],"error": true} )Not sure if it is the miner or the pool causing that error.
Going to clock speed 720 kind of works, 3.7mhs but stops hashing and needs to restart per bfg miner.
I have the power at roughly .86
