so today i start mining ETN but only 1 card is working the other giving me 0h\s
do you guys know why
my cards 2 rx 570 red devils
and the other card is giving me 700h\s
this's my bat...
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal -xpsw x -allpools 1 -d1 01
and he gave me at the begining unknown option -d1
unknown option 01
after like 4 5 mins the other card start to hashing but its giving me only 400h\s :S :S
and i forgot to mention my driver is adrenaline
do you guys know why
my cards 2 rx 570 red devils
and the other card is giving me 700h\s
this's my bat...
NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal -xpsw x -allpools 1 -d1 01
and he gave me at the begining unknown option -d1
unknown option 01
after like 4 5 mins the other card start to hashing but its giving me only 400h\s :S :S
and i forgot to mention my driver is adrenaline
no one can help ?? !!!!! still the same problem i removed the -di
post your syntax, its supposedly ok now after removing -di 1 in your parameter.
are there any new errors aside Unknown Option -d1?
no error just 1 card start with 0.00h\s and then after a 2\3 minutes it start hashing with ~400h\s
NsGpuCNMiner -xpool stratum+tcp://asia-etn-stats.hashparty.io/:3333 -xwal -xpsw x -allpools 1
1200\1950 core\memory
i even tried wih default core\memory no changing just the card that was doing 700 foes down to 600 and the other stays the same 0.00 goes up to 400
ok try to remove the 1 GPU card and install the problematic card in PCI-e x16 slot and fire up your Claymore miner, observe if this will go fine.
If yes, check your PSU or Riser