want to move past 3.1.1 on my pi with BE's but i really dislike arch. does 3.3.4 still have usb issues with rasbian wheezy? Is there a custom libusb that works with it yet?
Sorry if this is posted elsewhere i did a few searches and could not find anything. Thanks.
How to compile with the known working libusb is documented step by step in README (I added it in 3.3.2)
https://github.com/ckolivas/cgminer/blob/master/README#L112It is actually not many commands: get, extract, configure, make, autogen.sh cgminer (with the new libusb) then the rest as usual
I have that working libusb source archive in my cgminer-binaries also:
https://github.com/kanoi/cgminer-binariesWas able to follow your directions with 3.3.4 but unfortunately its not working. If a single usb device is connected to the onboard hub it never finishes booting. I troubleshot for a few hours yesterday to no avail. Even when i get it started it halts or reboots when i connect any usb device.
I started from a clean wheezy but one compiled with FBTFT drivers and then configured to use my 2.8" screen. I think setting that up may have prevented cgminer 3.3.4 or the libusb to build correctly or maybe theres just a conflixt.