Thanks lastbit and GandalfG for the info. I have access to a nice 12ghz oscilloscope and will take noise and ripple measurements of the output of the VR and see if it gets unstable past 20a.
Just took some measurements. At the top of the board closest to the VR im seeing 1.2v at the bottom im seeing 1.15v! Im surprised to see so much of a drop! They must have cheeped out on the amount of copper on the board.
I measure my board with my 100MHz oscilloscope with 1.3V mod and did not see noise on power lines. I check it now after over 10 days mining.
About drop:
Standby: 1.298V
395MHz:
1.278 on coil VR and nearest capacitor
1.268 first two chip
1.228 last chip.
I solder silver-plated wire 0,8mm across one board and check how its help.