I'm running 631 @ 88% fans currently (100 makes an annoying vibration in my floor). Running fine, temps in the mid to high 70s (pulling cold basement air), though I am still baffled by the whole "if you reboot, your temperatures change by 5-10 degrees" thing.
theyre 5-10 higher or lower for you?
They would be lower because rebooting them cools them down cause mining stops then fans sync. Wont last though depending on ambient temp
Nope, they're both. I'm talking about a bug in the A3 itself (that others have reported too). If I make a change, as it is resetting it will either go up 5-10 from the previous running or down, but whichever it is it runs consistently at. So for example, my current temps are 79-75-81. The last time I changed wallets, the temps were all in the mid 80s, so I reset again and they are back down. It's been a pretty common thing based on posts on this board (though I don't know if it is universal or not), so if your A3 is running hot, you might be able to bring it down a bit just by hitting "save and apply".
I dont have good data to support this but I've basically noticed the same thing and found it really odd. . . couple restarts and monitoring temps for just a short period seemed to yield "yeah it looks good now.." lol