my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? 
i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?
mobo GA gaming b8
Intel CPU G440 @3.30GHz
4gb DDR4 RAM
win 7 64bit
crimson relive 17.8.1
i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?
mobo GA gaming b8
Intel CPU G440 @3.30GHz
4gb DDR4 RAM
win 7 64bit
crimson relive 17.8.1
Hi! I have same G card (hynix memory BIOS mode timing patch) and until i install "Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23" drivers i didn't have more than 11'5 Mh/s.
Less that 7'7 Mh/s without Bios mode.
Now, whit this driver, i have ETH SOLO 13'9 with set cclock 1080, mclock 2015, limit power +0 (14'6 at mclock 2075 with minimal errors HWiNFO64).
In DUAL ETH-DCR mining Eth 13'5 Mh/s and Dcr 340 Mh/s with -dcri 25, same clocks but 12w more of consuption.
If you answer the question about drivers: Yes, i install some versions adrenalin but worst results.
MSI H110M PRO-VD
Intel CPU G4560 @3.50 GHz
8 Gb DDR4 RAM
PS RADIX IV 500W PFC active
Win 10 64 bit
Beta Blockchain Aug23
Claymore 10.6