I just received my 2pac and I cannot get it to work correctly.
I consistently get "share above target" very few of my shares are getting accepted. Same issue on windows and linux machines.
I've tried at 100mhz and up to 200mhz. No change it the issue. I also use a powered hub, this is the only device on the hub currently.
http://puu.sh/zg3yh/59ce44f73d.pngAny help getting it to work would be appreciated. Thanks!
What I use to start it.
./cgminer -o stratum+tcp://eu1.miningpool.shop:3333 -u 5xcZLmxBTU6whZWFCRc3qxVU8svZJQQTMD -p c=PLTCR --gekko-2pac-freq 150 --verbose
I think the pool itself is suspect. I've tried your command with my 2pacs which are perfectly fine, but get the same 'above target' errors on that pool.
I suggest to try with one of the major btc pools like slush or ckpool.
