Post
Topic
Board Mining (Altcoins)
Re: My RX580 Benchmarking and Results: 30.5Mh/s @ 77.5W (+ 1130MH/s Dcr w/ 125W)
by
mitserdt
on 07/02/2018, 18:11:32 UTC
Thanks to everyone who has contributed to this thread!

I'm looking for help in getting my 2 XFX RX 580 GB Hynix to hashing > 30 Mhs.  I'm close and getting a consistent 29-29.5, but never go above 29.5.  I've made the following changes:

GlobalCore 1200
GlobalMem 2175
GlobalPowerTune 3
Globalminer Claymore (9.7)

Modded the GPU Rom to copy the 1750 Mhz Timing setting to the 2000 Mhz setting.

I've seen several instances of people getting over 30  Mhs with this card.  How can I get that last 1 Mhs?

My numbers are based on single mining ETH.

TIA.

mu2pilot


Hi, sorry for quoting after long time, but I need some help. I will have in couple of days 3xXFX RX 580 GTS XXX 8gb, so I am wondering what PSU are you using, i have one of 1000 watts, but not sure if this gonna be enough.
Hope you will answer.....

Thanks in advance.

Should be allright. I'm running three cards (RX580) on a 650 Platinum without any trouble. The uptake isn't that high.