Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
5 GPU's at 1000w? Probably need more power.
Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors.
Dual mining different story, 1200-1300W PSU would be recommended.
thanks, but i have 1800w look at my post. RYXES does not see that i have 1000w + 800w
my problem is 'hangs on opencl call' and now i dont know where i have to search
If it is saying that for a certain GPU, you need to turn down your overclocking.
Linux 16
I have noticed that a one of GPU might hang up and has 0 MH if:
- Has too overclocking bios: for example, RX580 8gb MSI with BIOS 31 mg/h with 6 GPU works unstable and gives the same average hash rate as with bios for 28 mg/h which works stable.
- unstable power. I mean deliver a quality of power. When I had bougt and install additional voltage regulator for all office rig starts work more stable.
- also, some of overclocking AMD GPU could prevent boot a PC.