You have been faster than me! ah ah!
You can use ./nvOC command for all kind of reports
Just run it with no arguments to see the options
Code:
./nvOC
Examples
Code:
./nvOC miner-log
./nvOC wdog-log
./nvOC master-Log
./nvOC wdog-log
./nvOC master-Log
The webpage link works great, and I have been using SSH into the rig to get all that info using the ./nvOC commands.
But just seeing the words:
Code:
Currently Mining: BTG
Auto Switcher: WTM Auto Switch Running
in the reporting is not what I am talking about, exactly.Auto Switcher: WTM Auto Switch Running
For example, a few times I have seen Monacoin being switched to by WTM (it's in my WTM list) but on the MPH Monacoin page it never shows my worker there, never shows and hashrate there and never shows any transactions.
So that is my dilemma. Is there a way in the ccminer or whatever miner is being used by a coin, to see the coin being miner?
This is what I see in the reports:
Code:
Miner Hash Rate / Output:
2018-02-11 10:04:28 AM| GPU0 69C Sol/s: 545.5 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 178
2018-02-11 10:04:48 AM| GPU0 69C Sol/s: 558.5 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 182 ++
2018-02-11 10:05:08 AM|> GPU0 68C Sol/s: 543.0 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 178 ++
2018-02-11 10:05:28 AM| GPU0 69C Sol/s: 549.4 Sol/W: 3.06 Avg: 548.3 I/s: 293.7 Sh: 2.30 1.00 178
2018-02-11 10:04:28 AM| GPU0 69C Sol/s: 545.5 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 178
2018-02-11 10:04:48 AM| GPU0 69C Sol/s: 558.5 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 182 ++
2018-02-11 10:05:08 AM|> GPU0 68C Sol/s: 543.0 Sol/W: 3.06 Avg: 548.3 I/s: 293.9 Sh: 2.30 1.00 178 ++
2018-02-11 10:05:28 AM| GPU0 69C Sol/s: 549.4 Sol/W: 3.06 Avg: 548.3 I/s: 293.7 Sh: 2.30 1.00 178
Where in this miner output does it show the coin being mined?
Thanks for your patience.