Re: [ANN] Bminer: a fast Equihash miner for CUDA GPUs (5.3.0)
@realbminer
Today there was a problem with the zenmine.pro mining pool,...don't know what was up but after investigating I've found out that bminer still has some sort of connection problems...see the picture below,...all this time the GPU was at full load,...although it didn't had a proper connection to the pool and I couldn't see it on the minning pool. Then I've switched to ewbf/dstm, both miners connected immediately and are working properly?
I use following in a batch file:
This is a huge issue! I've lost at least half of the hashrate because of this bug.
Today there was a problem with the zenmine.pro mining pool,...don't know what was up but after investigating I've found out that bminer still has some sort of connection problems...see the picture below,...all this time the GPU was at full load,...although it didn't had a proper connection to the pool and I couldn't see it on the minning pool. Then I've switched to ewbf/dstm, both miners connected immediately and are working properly?
I use following in a batch file:
Quote
-max-temperature 80 -max-network-failures 5 -gpucheck 0 -watchdog=false
I've tried without SSL connection to the pool, and the result was the same. Everything that's written in a console is written also in a log file,...so nothing new can be obtained from the log file.This is a huge issue! I've lost at least half of the hashrate because of this bug.