Re: Anyone else having issues with their Antminer A3?

My A3 problem is when it started as soon as the fan blowing fast, the red led was blinking and then the fan slow again. And then the fan started blowing fast and the red led was blinking and the fan slowing again. And it repeating itself on this condition.
I can't get into A3 monitoring page. I get blank info and can't go to miner status, configuration, network etc. I resetted several time but the problem still the same.

Any help??

here the video of this problem
https://www.youtube.com/watch?v=TnlaL6h9kHc

So you are saying you cannot change between pages over to NETWORK settings?

yes

If you can successfully get to a kernel log page it should show your failures or errors but sounds to me you really cannot access anything, however for the sake of hindsight go through this manual if you have not already and see about default reset procedure on page 16

https://file.bitmain.com/shop-file-server/firmwares/Antiminer%20A3/Manual/007201802091050251715B3L9tLw0659/A3%20installation%20guide.pdf

ASIC status
O means OK
X means error
--means dead

If nothing is displayed it does not have to mean they're dead