Yes power is going to be a problem (well one problem) , I found a replacement regulator for the one on the board , going to need a new inductor also. The new regulator has a ground pad so that works out have to take off the silk screen but it *should* be a drop in replacement, the inductor not sure yet. I have been running it at 20 MHz for 5 hours now and the stats are
A:641 R:1+0(.16%) HW:39/1.6%
The bad thing that is at 1.525 V and 4.004A so it would be max on the new regulator, most all the other regulator chips either have the pad as output or different pin out. If the chart holds up were going to be at 1.75V and 5.5A for a 24 MHz run, if it will. I am going to put a heat sink on top of the chip tomorrow, running about 137 F now on top.