Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Hardware
Re: BFL ASIC Firmware & Hardware, Understanding & Optimization
by
MrTeal
on 27/08/2013, 21:00:19 UTC
Quote from: Red_Wolf_2 on August 27, 2013, 08:24:06 PM
I'm guessing those on-die temp sensors are the pins labelled ADRS0, ADRS1 and ADRS2?
No, those set the chip address (0 to 7) in the SPI chain. The temp diode is ball M8 and M9.