Hello Guys,
I need help in my rig when i starts mining ETH with one gtx 1070 amp Extreme it freezes. I used minergate to mine My rigs configuration is
Asrock h110 pro btc+
Ram - 4 GB DDR4
PSU- 1200 Watt
OS- Windows 10 Pro
GPU- gtx 1070 *1
I used only one GPU. set it up with PCI port directly with the Motherboard. Then I used it with a riser cable. In both situation its same. when I start mining with minergate with in 1 min the system freezes. when it up i found there is no card. Then after rebooting the system I can find out the gpu.
try it without the riser.
plug gpu directly into the motherboards x16 slot and see if everything works fine.
if so you need to get better risers.
i see you tried this already.
remove any overclock from the gpu and run on defaut settings.
also make sure you are connecting the gpu with both power connectors on top. install the latest bios and drivers also before you start.