Post
Topic
Board Pools
Re: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool
by
xredirector
on 16/02/2018, 02:08:21 UTC
Hi,

I have installed jtoomim p2pool, rented a miner with 1.2Th/s on miningrigrental.
I am getting an error about very high difficulty from the web interface of the mningrigrental:

Code:
High Worker Difficulty
One or more workers on this rig has been assigned a share/worker difficulty by your pool that is too high. Hashrate performance issues may occur.
The OPTIMAL Difficulty range for this rig is 1,048 - 6,286
Please either adjust your worker settings at your pool, or change pools if you are unable to do this at your current pool. Thanks!

On my pool:

Code:
2018-02-15 20:47:39.076359 P2Pool: 17489 shares in chain (8844 verified/17493 total) Peers: 7 (1 incoming)
2018-02-15 20:47:39.076644  Local: 3278GH/s in last 10.0 minutes Local dead on arrival: ~0.0% (0-66%) Expected time to share: 17.5 hours
2018-02-15 20:47:39.076732  Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: (0.0000)=0.0000 BTC
2018-02-15 20:47:39.076816  Pool: 6303TH/s Stale rate: 4.0% Expected time to block: 22.7 days
2018-02-15 20:47:47.832753 Generating a share with 1041124 bytes, 3989239 WU (new: 699568 B, 2797606 WU) in 412 tx (8 new), plus est gentx of 1668 bytes/6708 WU
2018-02-15 20:47:47.833033 Total block stripped size=984453 B, full size=1042872 B,  weight: 3996187 WU
2018-02-15 20:47:48.564074 New work for 1GM3HXExxxxxxxxxxxxxxxxx! Diff: 227741.53 Share diff: 1573940.25 Block value: 12.62 BTC (412 tx, 1041 kB)

Pool web interface:
Code:
Version: 15.0-93-gb190c56
Pool rate: 6.30PH/s (4.0% DOA+orphan) Share difficulty: 1600000
Node uptime: 2.4 hours Peers: 5 out, 1 in
Local rate: 0.00H/s (NaN% DOA) Expected time to share: Infinity years
Shares: 0 total (0 orphaned, 0 dead) Efficiency: ???
Payout if a block were found NOW: 0 BTC to 1JHcxhpiCcSTbeWvR1QGK81TkWbyRAqfL8. Expected after mining for 24 hours: 0.00 BTC per block.

How does p2pool adjust the difficulty? What did I miss?
How can I lower the difficulty?
I have tried to pass "d=12000" as a password for the miner, but I do not think it made any difference.
Same miner works fine on p2pool.org:9332

What do I do wrong?

Thanks!