You might have done all the basic troubleshooting but let's go through some of the things and see if any might've helped.
1. Make sure you have the dual algo pools enabled in Online Services, NiceHash, MPH or the Yiimp ones even.
2. Were you able to benchmark the EthOnly as well as Dual Mining?
3. Are there any hashrate entries for the dual algos under dual section?
4. When mining started, Does the Right Click Miner -> Details show that any of the dual mode were considered as most profitable such it tries to mine those? Also, you can see the command being launched through this window, is it parsing the correct command?
5. Where were you entering user-defined command line parameters? there are several places you can put those in, one in Miner properties, one in Profit Profiles at least, there are also claymore related commands that it is limited to a few supported parameters like ESM for example.
6. If the detailed section shows it's parsing the correct command, then what happens when you RightClick Miner -> Diagnostics? did the output seem normal as expected?
Cheers,
1. only use MPH, when i run claymore alone it dual mines, when i run from inside AM it will only mine ETH only -mode 1
2. no problem benchmarking ETH only as well as dual mining
3. blake 2b 4.67Gh (dual 790Mh) ETH 79.Mh (dual 71Mh) sha-3 2.16Gh (dual 716Mh)
4.from details for ETH - MPH-ETH $6.66 $6.12 (incl sha-3 $0.13) (incl blake 2b $0.05) also shows incl dcred,lbry,pascal,blake 2s... however everything with a 2nd coin is grayed out, only the ETH only line is in black text
5. have tried to cut/paste my working dual mining cmd line in miner properties, profit profile and in the claymore specific cmd line options boxes. have also done this with claymore as the only active miner in AM.
6. using the diag. and playing with every setting i can or just running the miner in AM give the same results... ETH only mining with the following output
ETH: 1 pool is specified
Main Ethereum pool is us-east.ethash-hub.miningpoolhub.com:17020
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...
NVIDIA Cards available: 6
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 7:0:0)
GPU #2: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 8:0:0)
GPU #3: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 9:0:0)
GPU #4: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 12:0:0)
Total cards: 5
ETH: Stratum - connecting to 'us-east.ethash-hub.miningpoolhub.com' <45.33.104.156> port 17020
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management is enabled on port 4029
ETH: Stratum - Connected (us-east.ethash-hub.miningpoolhub.com:17020)
ETH: Authorized
Setting DAG epoch #170...
Setting DAG epoch #170 for GPU2
Setting DAG epoch #170 for GPU3
Setting DAG epoch #170 for GPU4
Setting DAG epoch #170 for GPU1
Setting DAG epoch #170 for GPU0
Create GPU buffer for GPU1
Create GPU buffer for GPU2
Create GPU buffer for GPU3
Create GPU buffer for GPU0
Create GPU buffer for GPU4
ETH: 02/17/18-11:57:14 - New job from us-east.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/safter this it takes about 15-30s for all the cards to spool-up and over clocks to kick in and the DAG files to finish loading
when running via my cmd line batch file without using AM i get the following
C:\Users\diroc\Desktop\minetest\Claymore v11.0>EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:20535 -ewal Whatt.1 -eworker Whatt.1 -esm 2 -epsw x -di 01235 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal Whatt.2 -dpsw x -dcoin sc
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual GPU Miner - v11.0 ║
║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is us-east.ethash-hub.miningpoolhub.com:20535
SC: 1 pool is specified
Main Siacoin pool is hub.miningpoolhub.com:20550
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...
NVIDIA Cards available: 6
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 7:0:0)
GPU #2: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 8:0:0)
GPU #3: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 9:0:0)
GPU #4: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1 (pci bus 12:0:0)
Total cards: 5
ETH: Stratum - connecting to 'us-east.ethash-hub.miningpoolhub.com' <192.81.129.199> port 20535
DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
ETH: miner-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SC: Stratum - connecting to 'hub.miningpoolhub.com' <34.196.248.45> port 20550
SC: Stratum - Connected (hub.miningpoolhub.com:20550)
ETH: Stratum - Connected (us-east.ethash-hub.miningpoolhub.com:20535)
SC: Authorized
Setting DAG epoch #170...
ETH: Authorized
SC: 02/17/18-12:01:25 - New job from hub.miningpoolhub.com:20550
ETH: 02/17/18-12:01:26 - New job from us-east.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
again after this its the DAG's loading info and cards spooling up and OC's kicking in
feel free to edit out the wall of text when quoting... if i new how to hide it in a pop out in-frame window i would