Re: [Work in progess] Burnins Avalon Chip to mining board service

What hash rate are you able to get your bitburner to? I'm trying to find a decent cgminer setting

After many tests it looks like these are my best settings: 28ms, 450MHz, 1334mV, target temp 30°C and it runs with 53°C giving in average 43.8GH which means 8.76GH per bitburner xx.

I would like to run 5 miners with 5 different settings to test it out but till now i still wait for the answer if its possible to do without the first cgminer finding all miners and using them all.

Can you share your cgminer cmd line or config?

Its sudo ./cgminer -o stratum+tcp://mmpool.bitparking.com:3333 -u *** -p d=256 -o stratum+tcp://zet.dsync.net:3333 -u *** -p *** --avalon-options 115200:20:10:28:450 --bitburner-voltage 1334 --avalon-temp 30 --queue 6

You have to customize the avalon options for your number of boards. The first 20 remains but the 10 means i have 5 boards. You count your boards that are chained with CAN, regardless if bitburner x or xx and take that number x 2. In my case 10 because i have 5 boards chained.

Quote from: dani on September 01, 2013, 06:05:12 PM

Hey burnin,

I wonder if you could put for every discounted bitfuryburner you may sell 1 useless pcb of a bitburner in. As I understood these parts are wasted anyway for paid preordered assembly, I'd like to get over this and have something I can put on my wall. It's still sexy as hell Cheesy

offtopic:
Maybe one day my grandchildren will ask "Grandpa, what is it?" - It's an almost finished bitcoin miner, it cost me a fortune and would mine up to 9 gh/s.. "But grandpa, even my watch mines 100x that speed! It's sooo slow" - back then it would mine 0.2btc/day or so when it should have been delivered "Thats a fortune! Shocked

" -

Arent the discounted bitfuryburner discounted because the pcb can be reused? So you already get the pcb in form of the bitfuryminer. I might be wrong.