Hi,
What is the maximum current for 5v ON YOUR PSU.. if you use 12 times 2 amps you use 24 amps with 5 volt, that will be 120watt on the 5 volt rail.
maybe thats to much...
GRTZ.
here are the stats of the PSU - do you think its to low?
the performance getting better at clockspeed 384 - but not stable
https://image.prntscr.com/image/OSIRvEbkQ1KmbH1nugOd_g.pnggreets and thanks for help -
mike
Your PSU is 15 amps max on 5 volt so there is to little juice. Try using 8 off them on 600 clock speed.than you use about 1.5amp per mld.
Remove the other 4 for testing purpose.
8 mld's times 1.5amp = 12amp. That will do and your PSU will have a little margin 15-12 = 3 amps. Or buy a bigger PSU.
For your information 600 clock is about 1.5 a 1.7amps, if you go to 796 the power draw can be 2amps per mld with margins , and so on for 8XXmhz
The higher the clock speed the higher the amps.
I use the mld's on clock 796 this is what I measure
MLD1 t=60 graden 1,65A CoreV=0,746volt
MLD2 t=56 graden 1,77A CoreV=0,763volt
MLD3 t=60 graden 2,05A CoreV=0,748volt
MLD4 t=70 graden 1,78A CoreV=0,739volt
MLD5 t=59 graden 1,8A CoreV=0,764volt
graden = degrees (dutchman)
So you see there can be a huge difference in the MLD's
Grtz and good luck
