So I decided to add some command line options to my start file that significantly increased the stability, slightly increased the hash rate, and significantly decreased the HW on my old Gridseed Blades, with a few changes. Lo and behold, the same effect was had on my wonderful Moonlander 2's. I am running 17 of them at the moment on some pretty good hubs. I saw a stability increase of a day or so, hash rate increase of 5% and 50% reduction in HW!!!. Not sure what all of the settings do but hey it really seems to make a difference. I also always launch Bfgminer with full Admin privileges on Windows, the same effect was had on the Pi 3.
C:\moonlander\bfgminer-5.4.2-futurebit2-win64\bfgminer.exe --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u worker.1 -p 1,d=4096 -S MLD:all --set MLD:clock=600,baud=23040,chips=1,modules=2,usefifo=0,hotplug=17,thread-concurrency=50000,lookup-gap=0,gpu-threads=1
Cheers and Happy mining
LTC addr : LbDVdRR8dXwS2WrU4dWY6W97bEY7FY1vfn
DOGE addr : D5oSoTJjWLKabTUSCnSRyhgdPJufAkXmT6
BBK addr : BL6EmxG32YptXQTp6KXDqyq3AMHU2UZbk4
Cool man! This worked. It dropped my error rate a little and in fact did jump up my hash rate a little. I was averaging 8,800 and now averaging 9,200 hash rate on my two Moonlanders. Error rate on both sticks was about 1.8% roughly and now both are below 1% (about .95).
Thanks!
Bob