Got an MSI Air Boost V56, does 935/935 hash @ 950 HBM through PPT mods. Draws way less than 150w (130w if hwinfo's anything to go by). XMR-STAK intensity is 1940/1940 IIRC. Ambient temperature usually 65f or lower, cards never go above 57c under those conditions.
I have 2x Asus STRIX V56s and 10x Sapphire Pulses coming in. Think I should just sell them and find some 1080/1080Tis for relatively normal prices? Pretty tired of maintenance and tweaking on the AMD side. It's fun for the first couple cards, then it just becomes burdensome. Alternatively I could just hoard the cash and wait for Volta/Ampere?
what ppt did you use for MSI Air Boost i have 3 but they are unstable crash randomly more than 10 times a day and i have a lot of bad shares. any help is welcome.
dont exceed 905hz memory and u will get ~1820h/s stable. this is maximum u can get with hynix memory.
@905 1 of the gpu's freeze after making 1st share i am at 930;900 but very unstable
what should i use in p3 memory 905:900 is ok or should i feed a little bit more the gpu with power
doesnt matter what u put after memory clock. u can adjust mem voltage only via vbios flashing not via ondriventool.
Stop spreading disinformation. It does matter.
The voltage you think is fixed goes to the entire memory regulator.
Go read overclockers.net .
Miners usually need to read that including to make modifications in powertables. Vega is a weird card and the voltages are kind of unique.
There you'll have a bigger picture of it.