I just upgraded and tried to configure api again and messed something up. I can access miner page but it just keeps loading. Can't upload firmware again. No card reader just an empty slot where it should be. How do I fix this? I can still access it with telnet. Not sure what to do once in there to fix issue.
Hi wease,
I had problems similar to your probing too. solution of the problem;
1- Download the latest firmware from innosilicon website.
2- Open console with telnet and login to the innosilicon console
3- cd / tmp
4- Open the hwver file via vi command "vi hwver"
5 - If you do not write anything in the file, this is where the error comes from.
6- hardware version writes on the controller board.
7- write G19 or G9 into the hwver file according to the board version
8 - Save with ESC and: wq
9 - Write device ip address from chrome
10 - Select the firmware file you downloaded last by choosing Upgrade from the miner console by clicking the system tab
11- Press the apply button.
Wait for the device to boot.
regards,
Nuri Yesim