Re: [Guide] Comprehensive ASICMiner Blade Setup

Question:
Is it okay to connect wires from two molex from the PSU than just getting a splitter? Do you HAVE to have a splitter? If not then what is the alternative. I didnt seem to find any here..

You can cut the wires on your PSU and connect them directly to the green plug.

It's cleaner to do with the splitters though, and gives you a little more length to work with.

My issue is:

PSU will not stay on while connected to blade.
Will power on when NOT connected to blade.
So I went out and bought another PSU. Same issue. Yes Im using the paperclip in the appropriate pins.

it happened to me at first then i checked the cables that goes inside the green thing and it was loose after that it is smooth sailing

So it's a cable issue between the wires and that green adapter you put them in that plugs into the blade. Yes?

yes i unscrewed it you can see it there is a square that goes up and down with the screw put the wire in tight and screw it back

and give it a try

its been running sold for 12 hours now

Yeah i did all that. No dice.