I don't agree. I see a slight decrease in ETH and a big increase in Blake2S when I keep increasing the -dcri to about 55.
Let me re-phrase - Running Claymore 11 dual mining Eth + Blake 2s with RX modded cards
-dcri = 35 max - any higher and you WILL see Eth start to decrease...
Ill run a side by side on my test box with a 560 4g vs 1050ti .. I know with -dcri 35 the TI blake2s output is very low while the rx560 is maxed out.. Just haven't really had time to play with it
The dcri setting really depends on the card, even if they are the same model. I suggest you enable one card at a time and find the best dcri setting for each and set each one for optimum performance. For example,