Re: [LABCOIN] IPO [BTCT.CO] - Details/FAQ and Discussion (ASIC dev/sales/mining)
****WARNING to all Labcoin Shareholders****
People there are no traces going to the chips on these circuit boards. There are no decoupling capacitors near the chips and there does not appear to be a ground plane on the board. Ask any of the DIY asic developers here on the forum and they will confirm that these things are absolutely necessary to create a working miner.
I was a big believer in Labcoin but i am completely out now. This is a disappointing end to what could have been a promising venture.
I welcome a realistic explanation from Labcoin but at this point I am seriously warning anyone to invest at their own risk.
People there are no traces going to the chips on these circuit boards. There are no decoupling capacitors near the chips and there does not appear to be a ground plane on the board. Ask any of the DIY asic developers here on the forum and they will confirm that these things are absolutely necessary to create a working miner.
I was a big believer in Labcoin but i am completely out now. This is a disappointing end to what could have been a promising venture.
I welcome a realistic explanation from Labcoin but at this point I am seriously warning anyone to invest at their own risk.
+1
No power circuitry, no vias, no ground plane. This board looks very odd.
What is the controller board? he says these are the blades without the controller board. Could the controller board have all that other shit? I dont know shit about electronics.
