And it looks like my Jalapeno bit the dust. RIP. 
Last night one of the ASICs seem to have stopped working, hash rate dropped down to ~4GH/s or so and only chip #7 was showing up when running java API stats. Then got home tonight and found the red status LED on the Jalapeno flashing quickly and cgminer unable to communicate with it.
Maybe I pushed the little guy too hard. Any ideas for reviving it or is it probably toast? Tried power cycling the unit but no luck. Going to leave it unplugged for a bit then try starting it up again and see if that does anything.
EDIT: Huh. Well that seemed to get it going again, at least for the time being. Still only recognizing processor 7, though, processor 3 no longer active and hashing.
Last night one of the ASICs seem to have stopped working, hash rate dropped down to ~4GH/s or so and only chip #7 was showing up when running java API stats. Then got home tonight and found the red status LED on the Jalapeno flashing quickly and cgminer unable to communicate with it.
Maybe I pushed the little guy too hard. Any ideas for reviving it or is it probably toast? Tried power cycling the unit but no luck. Going to leave it unplugged for a bit then try starting it up again and see if that does anything.
EDIT: Huh. Well that seemed to get it going again, at least for the time being. Still only recognizing processor 7, though, processor 3 no longer active and hashing.
I had this problem once after a firmware flash with a higher frequency setting (the red light rapidly flashing) and fixed it by reflashing with the released BFL firmware.