Re: GekkoScience Terminus R808 Miner Official Support Thread
One pod is not working correctly as it only detects 4 chips. Just wondering if it is a bad pod?
I have 5 pod miners running on a USB hub all running successfully on separate batch files.
Code:
[2018-03-04 12:43:51.340] Started cgminer 4.10.0
[2018-03-04 12:43:51.809] GSE 0: Terminus BM1384 Bitcoin Miner (10030025)
[2018-03-04 12:43:52.018] Probing for an alive pool
[2018-03-04 12:43:52.126] GSE 0: found 4 chip(s)
[2018-03-04 12:43:52.184] Pool 0 difficulty changed to 4000
[2018-03-04 12:43:52.243] GSE 0: setting frequency to 100.00MHz
[2018-03-04 12:43:52.252] GSE 0: open cores @ 100.00MHz
[2018-03-04 12:43:52.269] Pool 0 message: Authorised, welcome to solo.ckpool.org xxx.kipper01
[2018-03-04 12:43:53.019] Network diff set to 3.01T
[2018-03-04 12:43:55.633] GSE 0: start work @ 100.00MHz
[2018-03-04 12:44:56.038] GSE 0: frequency changed 100.00MHz -> 175.00MHz
[2018-03-04 12:43:51.809] GSE 0: Terminus BM1384 Bitcoin Miner (10030025)
[2018-03-04 12:43:52.018] Probing for an alive pool
[2018-03-04 12:43:52.126] GSE 0: found 4 chip(s)
[2018-03-04 12:43:52.184] Pool 0 difficulty changed to 4000
[2018-03-04 12:43:52.243] GSE 0: setting frequency to 100.00MHz
[2018-03-04 12:43:52.252] GSE 0: open cores @ 100.00MHz
[2018-03-04 12:43:52.269] Pool 0 message: Authorised, welcome to solo.ckpool.org xxx.kipper01
[2018-03-04 12:43:53.019] Network diff set to 3.01T
[2018-03-04 12:43:55.633] GSE 0: start work @ 100.00MHz
[2018-03-04 12:44:56.038] GSE 0: frequency changed 100.00MHz -> 175.00MHz
I have 5 pod miners running on a USB hub all running successfully on separate batch files.