I have a really annoying problem, with one mining rig, where I want to use my onboard GPU as the primary graphics but I can't. In MS Windows 10 I have a scheduled task to reboot once a day. On one rig all works fine but on the other rig I get the following error :
start building OpenCL program for GPU 0...
.
.
.
Miner cannot initialize for 5 minutes, need to restart miner!
ADL: CAnnot find any AMD adapters.
The funny thing is that once I remote into the rig the miner can then see the cards.
Please note in the log just before is does state that there are 5 cards found.
Anyone seen this problem ?
When you restart the rig wait for 12-15 minutes before you start Claymore. That freeze also happend to one of my rigs after restart and the only solution for me is to wait before I start miner. It`s unbelivable but that help.
I increased the time slightly but 12 minutes is not the answer.
If I change the M/B settings so the primary card is PCIE2(no on board) then there is not a problem. It's bloody annoying as my rigs have the same hardware so I don't get these sort of issues.
Does anyone have any ideas ?