Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0
Putting all my responses in RED and in one reply (working from nvOC in LOCAL mode so not able to copy-and-paste results, so I'm slow...)
# interfaces(5) file used by ifup(
and ifdown(
auto lo
iface lo inet loopback
Then I used: sudo service network-manager restart
That showed a graphical message that said I was now disconnected and off-line (which is interesting since I wasn't on-line to begin with
In order to be able to help you a bit, try to run the following command:
sudo lshw -C network
When I run that command, it flashes "PCI (sysfs)" real quickly & disappears and then flashes "USB" real quickly & disappears and then returns to the command prompt of m1@m1-sesktop:~$sudo lshw -C network
sudo lshw -C network | grep logical
When I run that command same outcome as command above: it flashes "PCI (sysfs)" real quickly & disappears and then flashes "USB" real quickly & disappears and then returns to the command prompt of m1@m1-sesktop:~$For some even more debug options, the result of the following commands will give us a hint on the potential driver/modules issues:
sudo lspci -nnk | grep -iA2 eth
This does nothing other than return to the command prompt.sudo lspci -nnk | grep -iA2 eth
sudo cat /etc/network/interfaces
Returns these three lines:# interfaces(5) file used by ifup(
and ifdown(auto lo
iface lo inet loopback
You can always try to re-initialize the network-manager using this command:
sudo dpkg-reconfigure network-manager
I get the following message: insserv: warning: script 'gpu' missing LSB tags and overridessudo dpkg-reconfigure network-manager
Then I used: sudo service network-manager restart
That showed a graphical message that said I was now disconnected and off-line (which is interesting since I wasn't on-line to begin with
Try this and get back with the output:
lspci -nnk | grep 0200 -A3
There seems to be a issue with the hardware if the lspci and lshw are returning naught...
Being a Gigabyte mobo, known for their hairy implementations of the Realtek to ICH bridging, it might help also to update your BIOS:
https://www.gigabyte.com/MicroSite/462/images/BIOS-Z270P-D3.zip
NOTE: Please check the HW revision of your mobo before trying to update. This is a "mining" optimised BIOS
I've seen something similar a while back with a rev. 1 board, similar to yours, that was running out of lanes for peripherals and the loading of the PHY drivers for ethernet and usb were loaded erratically at times.
I have two other of the brand new mobo's. Maybe best next step is to start over with a new mobo to see if I can either get it to work or, at a minimum, identify where it is in the process I'm using that the LAN controller becomes unrecognized?