This is Power Supply for Pc and it want power load of all lines (3,3; 5;12v) .
Measure 5 and 12 v (3,3 and other - not important) and if it have differences above 5-10% then load this lines by resistors to put volume down, to put volume up -5 v for example load 12v by resistor.
I am sorry, can you explain in simpler terms? There are a lot of typo's & I don't know what you mean by measuring 5v and 12v on the PSU. I know the PSU has two 12v rails @ 12A (14A Peak) which should be sufficient in powering the blade. Thanks for the help =)
Unfortunately, I do not have any resistors to use and test.