It is an old-cheapo PSU, 300W max. I can't find a molex splitter, as I just moved to a new house and its packed up somewhere in the mountain of boxes. What I did was hack off 2 Molex connectors on seperate rails and spliced the yellow 12v and black ground to the molex connector. Actually, now that I look at it, it appears as though one rail is 1.5A on 12v max while the other is 11.5A on the 12v.
http://i42.tinypic.com/281brz4.jpghttp://i39.tinypic.com/2hckn6e.jpgActually, I'm going to go to Best Buy today and pick up a new PSU for use with this and any future miners I get. Can anyone suggest me a PSU?
Ok awesome. Now take them two extra 5V (red) wires your not using and take 1 ground from each molex adapter & pair them in series with the 5-6V Fan. Turn on PSU after the adapter is plugged into the ASIC board. That should work.
Pictures: (Going to build a custom rig for the cards to slide in eventually) Just happy it works now =)
Hopefully them pictures help =) I took two grounds from one slot of the ASIC main green adapter & added em to the 5V red wires for the 6V fan.
(Note: the 5V fan is on top of the ASIC chip blade)That should fix your problem. If it doesn't send me a PM or post a reply here. If you decide to purchase a new better PSU. Buy one that is at least 800 Watts & has two 12v rails that supports at least 12amps per rail or more. Its important to have about 12v at asic power adapter & 1.2v on each module.
