Post
Topic
Board Hardware
Re: [Guide] Comprehensive ASICMiner Blade Setup
by
mdopro1
on 20/09/2013, 01:48:07 UTC
Mdopro1 &  Mountainjam,

  Use this format to input details into the server & user:pass. (After connecting to the config page @ 192.168.1.254:8000) --Config Page for each blade is xxx.xxx.x.254. If you don't change each IP to   ..etc .250,.251,.253,.254 should be different for each blade or you will have an IP conflict.
Quote
user:pass details: example.worker:password,example.worker:password
Server Address: IP_OF_PROXY_COMPUTER1,IP_OF_PROXY_COMPUTER1 (Note: Don't change the IP's or Proxies, keep both of them the same)

Also, double check the ports and make sure they are the same for the (pool) your trying to connect to. After you do that, double check everything and click the (update/restart button). =) Hopefully that works.

I tried that before, same IP/user info twice for main and backup always seem to restart the blade within an hour. I can try again to see if it will act any different now.

What's the deal with BFG supporting blade? How does that even work since it would never be running on the blade itself.