Hi Guys!
I'm new to mining and I was building up my very first rig a few days ago.
It tooks me roundabout 14 days to get it up and running as it should.... but unfortunately not with 6 gpus, because the PCI-e 16x slot is not working at all.
What I already did:
- bios update to F25a
- different bios settings - but mainly:
--- Mining mode "enabled"
--- above 4G decoding "enabled"
--- Max. link speed "Gen2"
--- OS Mode: Windows 8/10
--- CSM off
--- initial display "IGFX"
--- internal graphics "enabled"
--- super IO config: Parallel and serial "disabled"
- I tried 6 different graphic cards (4x MSI, 1x EVGA and 1x Palit)
- ~ 12 different riser cards from three different manufacturers
- 2 PSUs togehter and one by one
- different power cabling for the risers (switching SATA cables, etc)
... and then I bought a second GB H110-D3A mainboard, because I thought that the pci-e 16x slot must be broken, but I guess it wasn't... so to say: "same shit, different card"
I was also following this guide - step by step:
https://www.gigabyte.com/MicroSite/462/mining.html
system cfg:
CPU: Intel pentium G4400 boxed
Ram: 8GB Hyperfury X DDR4 2133
PSU: BeQuiet Dark Pro 11 1000W
Risers: Kolink and Elegant
SSD: WD Green 128GB
OS: Win 10 Pro - the virtual outsourcing file was increased to "17 - 21 GB"
Does anyone had the same problem and got it fixed?
Thx in advance for your help!!
BR,
Andi
I'm new to mining and I was building up my very first rig a few days ago.
It tooks me roundabout 14 days to get it up and running as it should.... but unfortunately not with 6 gpus, because the PCI-e 16x slot is not working at all.
What I already did:
- bios update to F25a
- different bios settings - but mainly:
--- Mining mode "enabled"
--- above 4G decoding "enabled"
--- Max. link speed "Gen2"
--- OS Mode: Windows 8/10
--- CSM off
--- initial display "IGFX"
--- internal graphics "enabled"
--- super IO config: Parallel and serial "disabled"
- I tried 6 different graphic cards (4x MSI, 1x EVGA and 1x Palit)
- ~ 12 different riser cards from three different manufacturers
- 2 PSUs togehter and one by one
- different power cabling for the risers (switching SATA cables, etc)
... and then I bought a second GB H110-D3A mainboard, because I thought that the pci-e 16x slot must be broken, but I guess it wasn't... so to say: "same shit, different card"
I was also following this guide - step by step:
https://www.gigabyte.com/MicroSite/462/mining.html
system cfg:
CPU: Intel pentium G4400 boxed
Ram: 8GB Hyperfury X DDR4 2133
PSU: BeQuiet Dark Pro 11 1000W
Risers: Kolink and Elegant
SSD: WD Green 128GB
OS: Win 10 Pro - the virtual outsourcing file was increased to "17 - 21 GB"
Does anyone had the same problem and got it fixed?
Thx in advance for your help!!
BR,
Andi