does anybody use dual atx power supplies with this board? I believe with a regular riser build you want to avoid having a gpu powered by one psu and its riser powered by another. It looks as though this would be unavoidable with is board, 1 psu would power the board(and its pcie slots) and some gpus while the 2nd psu would be powering the rest of the gpus that were connected to the 1st psus powered pcie slots. would this not be an issue on this board or am I over thinking this?
the rig I would be transferring over uses 2 evga 850 G2's, 4 pcie each that I use for cards now and molex for my risers in current build... would I be able to use molex to 6pin adapters to power the board?
i dont have the octominer board but i run two evga psus with my riserless onda b250 d8p, a mining board with similar layout. all mobo connectors are one one psu, plus several cards. the other psu is powering only cards. i use an add2psu to control the 2nd psu.
not sure about adapters, my psu dedicated to the mobo had enough native connectors to run everything without them. but if using molex (rated 75 watts) to 6 pin (rated 150 watts), i would use a 2x molex to single 6 pin type adapter. use no more than one 6 pin on a 2x molex adapter per psu string.