Awesome. Thanks 419M that does help and confirm what I am getting also.

I can't get past 225Mhz on the 6A brick that came with it but it does seem to running pretty well though at 225.
For my other one I am experimenting with a more efficient and stronger supply and have it running at 237.50Mhz for just over 100Ghz which is my goal for each Pod.
http://preview.ibb.co/cUPzqH/Term2_237.jpg

It is a 150Watt 12V supply with voltage adjustment. The one on the left is using the PCIe-6 connector and the barrel still on the right. The barrel won't supply as much reliably so I am going to convert that one also to see if I can run them both a little higher.
http://preview.ibb.co/mp50xx/Term_Power_Supply.jpg


Using 123 watts with 1 running at 237.50Mhz and 1 running at 225Mhz
https://i.imgur.com/rjWuBRS.jpg


Just for info, these pods seem to run at frequencies in 6.25Mhz frequency (just like the antminer S3s and S5s) which is a function of the 1384 chips in the Terminus and looks like VH has support for those frequencies as well in CGMiner (thank you sir!!) So here is a list of frequencies to try if you want to test and push just a little bit more. I can't get either of my pods to run at 250 Mhz even using the PCIe plug and the 150 watt supply by itself. The most I can get is 243.75. Will test some more when I get time but I have a feeling its a limitation of the voltage regulator. Solid build Sidehack so thank you and not complaining at all just testing the limits for the ones I received.

200 Mhz
206.25 Mhz
212.50 Mhz
218.75 Mhz
225 Mhz
231.25 Mhz
237.50 Mhz
243.75 Mhz
250 Mhz
256.25 Mhz
262.50 Mhz
268.75 Mhz
275 Mhz

Hope that helps somebody out.