Hello guys,
I am a noob miner since 2 months. From 10.6 to 11.4, i have got a same problem.
I have 6 RX588 rig, 30M hashrate for each card.
Sometimes after restarting the Claymore, or after reboot the machine and then start the Claymore, the Hashrate will down to 26 or 27, it may be return to 30 by itself after one or two hour, maybe not.
If i disable the GPU by clicking the number for 5 sec, and then enable it, the hashrate will be return to 30.
Does anyone has the same problem or the solution?
Thanks ~~~~~~~~~~~
Nobody else has the same problem?
I always had and still have this issue. Not a big issue since disabling and enabling get the hashrate back to expected.
I don't know why this happens but @zibastian explanation makes sense.
This is an issue with the driver, preventing the correct voltage to be applied after a GPU crash. You can also just restart the miner and you should get your hashrate back. This is not linked to Claymore, you should have the same behaviour with any miner