Hello,
If the pool owner/operator of freshpool.org could please fix whatever issue is keeping me from a proper hashrate, I'd GREATLY appreciate it!. I am not disparaging anyone's pool or skills, however after moving from one ELYA pool to freshpool, I should be getting 2.3kh NOT 1.26 or even less. I've seen my rig's hashrate down to 764kh/s with three evga gtx 1060 6gb, one gtx 970 4gb and 7 processor cores.
I know how to set up my rig and satellites, I do understand vardiff and static, I can code when needed but hate it and generally know my way around a computational set up to keep it running in top shape. Sooooooooooooooo, please pool operators, keep your pools right, tweak what you need to and assist me in restoring my missing hashrate. I don't know how many other miners are affected but I've been fighting with this all day and am VERY TIRED OF IT. Even with a 10-15% HR drop from rig to pool, this is still VERY unacceptable.
Thank you for your time,
Lady Hashington
dont forget that
- miner software tends to be overly optimistic, or even straight out lying about the hashrate they reach in order to get an edge on competition. take their reported hashrates with a grain of salt
- there's network lag
- there's all kinds of factors
at any rate, stealing from your *hashrate* would be the worst possible way to steal from you since it's immeidately visible
at every single pool i've mined at, all coins combined, i pretty much never had the advertised miner hashrate being also the accepted hashrate of the pool
5%-10% seems to be the average gap
if you really really want to make sure you're not getting your hashrate stolen, setup a local pool on your computer (takes a hour or two since you're computer savvy)
and mine on it and see the results
While I appreciate the response, I never said or implied hashrate theft. I simply asked for the pool owner/operator's assistance in restoring what I know to be MY rigs proper hashrate on pool. Nor have I stated I am going by "advertised" hashrate. I get slightly above 550 each with the 3 gtx1060 gpus, just over 400 with the gtx 970 4gb and 7 cores on 2 processors that equal average 220.
Do the math then adjust for negative factors. When 40-60 percent of a miner's hashrate is missing and there is nothing wrong with the configuration of said miner's rig(s) then it has to be a poolside issue. Hence, my request for assistance.
Your suggestion for a local pool for test mining has already been done. All gpu's are precise benchmarked and my HR is exactly as I know it to be. I don't have this issue with other coins or pools.