Hi Lexlima. I am using using claymore 11.2 as this is the most stable my rigs has ever been.
your fan probably come on of off due to how hot the card goes. its is probably at around 45-55 degrees c.
below is my config file which has been running stable for 9 days now.
7 card system, with RX580 8gb cards. cards reach a tmp of around 60 degrees. 6 X powercolor cards fan spin all the time, Sapphire card which fan goes on and off.
running amd bitchain drivers and cards have been modded. Still getting 30Mh's per card
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool ssl://eu1.ethermine.org:5555 -ewal 0x0f1c8f60fa11079829db7cfe8a383b2c4763bc6a.miner -epsw x -mode 1 -ftime 10 -esm 0 -tt 60,60,60,60,60,60,30 -fanmin 60,60,60,60,60,60,10 -fanmax 100,100,100,100,100,100,40 -tstop 72,72,72,72,72,72,72 -cclock 1100 -mclock 2100 -cvddc 850 -mvddc 860 -wd 0 -eres 3 -gser 2
see how you get on.
Vik
Vik,
Thanks man for this i will sure try this as 11.2 seems more stable for sure.
Can i ask you to make me a command line for my cards.
Just use my command line and change your tt and fanmin. You may need to tweak tt and fanmin settings. If you have all same cards leave as one figure only. if different cards you may need to insert the figure several times and tweak them. Leave all overclocking software turned off. I don't use any of them now.
I use the ssl connection to ethermine now.EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ETHEREUM_WALLET.WORKER_NAME -epsw x -tstop 85 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850
I know it is a lot but i am new to claymore overclocking.
I am only used to MSI and there i was using 1200/2200/-96V
Those were the only things i chaned and fan fixed at 70 %.
So you are saying that because my cards dont get too hot they are not spinning all the time?
Correct , don't worry if they spin up and down as long temps don't go over 60 degrees.Is there a way to keep them spininng?
If you want them spinning you I used to use afterburner and fix the fan speed, only the fan speed and do nothing else with any other settingsI looked at your code and some thing i am fimiliar with but this commands i dont know what they are and i read it on Claymore readme.txt but cant seem to understand.
-mode 1 -ftime 10 -esm 0 -wd 0 -eres 3 -gser 2
Hi Have a look at https://howtomine.co/2017/07/14/full-list-claymores-parameters-command-line-options/ regarding the settings. This setting i cant seem to understand.
I know i ask too much but i would be really appriciated if you could help.