Re: Official FutureBit Moonlander 2 Driver and Support Thread
Edit 2:
With some messing around i think i've found the culprit. One of the sticks was drawing 3.7 amps at 5v!! Even while running at 600mhz for a test it went over 3.58amps. Guessing this one is defected
Core voltage and memory both are at 0.8-0.82. This stick won't hash above 2.6-2.68MHash, so i'm hoping bitshopper.de has some sort of warranty for DOA sticks...You can put a command in the command line that turns on the log. In the log it will state how many cores are good. 63 is the correct number. Check that stick and see how many cores are working.
Per the boss
Put "-D 2>log.txt" at the end of the bat command. Start it up and it will spit out the log.txt file in same directory. In there you will see startup sequence and it checks for number of active cores. Should say 64.
It is 0-63 so it should say 63 not 64.
Bob